Wing extension design and tailoring for a scaled tiltrotor wind tunnel model

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The whirl flutter stability of a scaled tiltrotor wind tunnel model (TRAST) has been studied. A detailed wing-pylon structure model has been implemented, and integrated with a wing extension. The effect of a wing extension on tiltrotor whirl flutter stability has been investigated. Sizing studies of wing extensions are conducted based on stiffness required. The integrated rotor, wing-pylon and wing extension model represents all inertia, stiffness, and load path details which may provide more accurate prediction of wing mode damping of the system. The results indicate that a wing extension can generate significant aerodynamic damping for both wing beam and torsion modes. The downstop spring stiffness has significant influence on wing beam mode damping ratio. The geometric orientations such as sweep and cant angles have mild effect. A thin plate is used to tune the wing extension beam mode frequency to be closer to wing beam and torsion frequencies. The results show that tuning may help enhance both wing beam mode and torsion mode damping.

Original languageEnglish (US)
Title of host publicationAIAA Scitech 2019 Forum
PublisherAmerican Institute of Aeronautics and Astronautics Inc, AIAA
ISBN (Print)9781624105784
DOIs
Publication statusPublished - Jan 1 2019
EventAIAA Scitech Forum, 2019 - San Diego, United States
Duration: Jan 7 2019Jan 11 2019

Publication series

NameAIAA Scitech 2019 Forum

Conference

ConferenceAIAA Scitech Forum, 2019
CountryUnited States
CitySan Diego
Period1/7/191/11/19

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering

Cite this

Zhang, J., Smith, E. C., & Kang, H. (2019). Wing extension design and tailoring for a scaled tiltrotor wind tunnel model. In AIAA Scitech 2019 Forum (AIAA Scitech 2019 Forum). American Institute of Aeronautics and Astronautics Inc, AIAA. https://doi.org/10.2514/6.2019-1368